Special offers for the CMM RAPID-Plus


Coordinaten measuring machines made in Germany by THOME Präzision






Your delivery:

  • CMM RAPID Plus CNC “Made in Germany” - Uncertainty acc. ISO 10360-2 MPEe=2,2+L/350, MPEp=2,5µm
  • CNC control unit integrated in the base frame and one-hand joystick by RENISHAW
  • DELL PC, including 3-year on-site service, WINDOWS 10, 22” LED Monitor, “ALL IN ONE” colour printer
  • Stylus Set 10 Pcs., calibration ball Ø25
  • You will also receive the following equipment according to your requirements:


  • Coordinate measuring machine RAPID-Plus basic packages


    Renishaw TP8 manual probe

    Renishaw TP8 manual probe head

    Package 1

    Renishaw TP8 manual swivel head for simple basic applications
    benefits:
  • Very inexpensive
  • Also suitable for star pens
  • Pretty tough
  •  

    Disadvantage:
  • Cannot be automated if a button change is necessary
  • Cannot be automated if a stylus module change is necessary
  • Can only be swiveled by loosening a clamping screw
  • After that, the stylus module must be recalibrated each time
  • Measurement uncertainty increases proportionally with the length of the stylus
  • Operation area
  • Simple applications where you can capture all features with a stylus or a star stylus
  • The highest precision to be measured is approx. 0.023 mm

  • >Renishaw PH6 rigid probe head

    Renishaw PH6 rigid probe head

    TP200 probe from Renisahw

    TP200 probe from Renisahw

    Package 2

    Renishaw PH6 rigid probe head with TP200 probe

    Rigid probe head PH6 and high-precision measuring probe TP200 for use with star probes and, if required, with the SCR200 probe changing system.

    Benefits:
  • For stylus lengths up to 100 mm
  • Highest scanning accuracy even with longer stylus
  • The probe system requires little space
  • Long service life of the stylus modules of> 10 million touch points / module

  • Disadvantage:
  • No swiveling of the probe head

  • Operation area:
  • If all features can be recorded with a star stylus and if stylus lengths of up to 100 mm are sufficient

  • Suitable for the following applications:
  • The highest precision to be measured is approx. 0.012 mm
  • A lateral immersion depth of 50 mm is sufficient
  • The immersion depth of 100 mm in the Z direction is sufficient
  • Inclined holes outside the 3 main directions (X, Y, Z) are the exception or do not occur
  • More commonly used for small CNC measuring machines, as the probe system is very space-saving

  • Renishaw automatic turn and swivel head RTP20 from Renishaw

    Renishaw Probe head RTP20


    Automatic turn and swivel head RTP20 from Renishaw

    Automatic turn and swivel head RTP20


    Renishaw stylus changer MCR20

    RTP20 probe head with Renishaw MCR20 interchangeable magazine

    Package 3:

    Simple Renishaw RTP20 automatic turn-swivel head

    Can be adjusted in 15 ° steps by moving the machine. Reproducibility 1.5 µm with a swivel radius of approx. 70 mm.

    Benefits:
  • Inexpensive
  • Fully automatable
  • Small swivel radius
  • Compact design
  • An automatic stylus changer including 2 stylus modules is already included in the price
  •  

    Disadvantage:
  • Can only be pivoted automatically with the aid of an anchor rod
  • This must be in the measuring volume and thus consumes the measuring volume
  • The panning process is slow and takes about 10 seconds
  • The angular resolution of the two swivel axes is only 15 ° and is therefore relatively low
  • The stylus length is limited to 60 mm
  • The TP20 push button modules are relatively expensive at around € 890 / module
  • The service life of the modules is around 3 million. Touch points relatively low
  •  

    Operation area:
  • If the probe head does not need to be rotated and swiveled too often and probe lengths of up to 60 mm are sufficient
  •  

    Suitable for the following applications:
  • Swivel steps of 15 ° are sufficient
  • The duration of the measurement is not critical
  • The immersion depth of 60 mm is sufficient
  • More commonly used for small CNC measuring machines
  • Button pans are not that common

  • # Packages 1 Packages 2 Packages 3
    best price performance
    Probe Changer No Can be retrofitted MCR20
    Probe head/ Probe TP8 PH6/TP200
    high precision
    RTP20
    Rotating swivel head
    Measurement software ThomControl Basic geometry Basic geometry Basic geometry with CAD
    Measuring range
    500-700-500
    31.990€
    P755C-G-TP8-UK
    34.990€
    P755C-G-PH6200-UK
    39.490€
    P755C-C-RTP20-UK
    Measuring range
    600-800-500
    35.490€
    P865C-G-TP8-UK
    38.490€
    P865C-G-PH6200-UK
    32.490€
    P865C-C-RTP20-UK
    Measuring range
    700-1.200-600
    41.990€
    P1276C-G-TP8-UK
    44.490€
    P1276C-G-PH6200-UK
    49.490€
    P1276C-C-RTP20-UK
    Measuring range
    800-1.200-700
    48.490€
    P1287C-G-TP8-UK
    51.490€
    P1287C-G-PH6200-UK
    55.490€
    P1287C-C-RTP20-UK
    Measuring range
    800-1.500-700
    54.990€
    P1587C-G-TP8-UK
    57.990€
    P1587C-G-PH6200-UK
    62.490€
    P1587C-C-RTP20-UK




    CMM Rapid-Plus with motorized rotary swivel probe head PH10T


    Renishaw PH10T probe head

    Renishaw PH10T probe head

    Renishaw TP20 probe

    Renishaw TP20 probe

    MCR20 stylus change magazine from Renishaw

    MCR20 stylus change magazine from Renishaw

    Package 4 

    PH10T motorized rotary swivel head from Renishaw for CNC-controlled swiveling of the probe head in 7.5 ° steps and TP20 probe.

    Pivots motorized in 2 axes in 7.5 ° steps (max. 720 positions). A position feedback is sent to the control. The reproducibility of the swivel position +/- 0.5 µm with a swivel radius of around 100 mm. Max. Length of the extension of the probe 300 mm. Max. Length of the stylus 60mm.

    Benefits: 
  • Fast swiveling of the probe head
  • Höhere Schwenkgenauigkeit von +/-0.5 µm bei etwa 100 mm Schwenkradius
  • Higher swivel accuracy of +/- 0.5 µm with a swivel radius of around 100 mm
  • Greater process security through CNC-controlled swiveling
  • Finer resolution of the swivel angle (720 swivel positions)
  • Fully automatable
  • Relatively small swivel radius
  •  

    Disadvantage: 
  • The PH10T probe head is significantly more expensive (approx. € 7,000 more expensive) than the RTP20 probe head
  • The stylus length is limited to 60 mm
  • The TP20 stylus modules are relatively expensive at around € 900 / module
  • Touch points relatively low

  • Operation area:
  • Automated measuring machines with high reliability, as the probe head is CNC controlled
  • Shorter measuring times by swiveling the probe head quickly
  • Stylus lengths of up to 60 mm are sufficient
  •  

    Suitable for the following applications:

  • The highest precision to be measured is approx. 0.014 mm
  • The duration of the measurement plays a medium role
  • The immersion depth of 60 mm is sufficient
  • Swivel steps of 7.5 ° are sufficient

  • Renishaw PH10T probe head

    Motorized rotary / swivel head PH10T and measuring probe TP200

    Renishaw PH10T probe

    Renishaw PH10T probe head

    Renishaw SCR200 stylus change magazine

    Renishaw SCR200 stylus change magazine

    Renishaw PH10 series probe heads

    Renishaw PH10 series probe heads



    Package 5:

    PH10T motorized swivel head from Renishaw for CNC-controlled swiveling of the probe head in 7.5 ° steps and TP200 probe for probe lengths up to 100 mm with high probing accuracy.

    Pivots motorized in 2 axes in 7.5 ° steps (max. 720 positions). The header position is reported to the control. The reproducibility of the swivel position +/- 0.5 µm with a swivel radius of around 100 mm. Max. Length of the extension of the probe 300 mm. Max. Length of the stylus 100 mm.

    Benefits:

  • Fast swiveling of the probe head
  • Higher swivel accuracy of +/- 0.5 µm with a swivel radius of around 100 mm
  • An automatic stylus changer including 3 stylus modules is already included in the price
  • Greater process security through CNC-controlled swiveling. Finer resolution of the swivel angle (720 swivel positions)
  • Stylus lengths up to 100 mm
  • High scanning accuracy even with longer stylus
  • The price for a stylus module is around € 550, significantly cheaper than the TP20 modules at around € 900
  • Fully automatable. Relatively small swivel radius.
  •  

    Disadvantage:
  • The PH10T is significantly more expensive (approx. € 7,000 more expensive) than the RTP20
  •  

    Operation area: 
  • Automated measuring machines with high reliability as the probe head is CNC controlled
  • Shorter measuring times by swiveling the probe head quickly
  • Stylus lengths up to 100 mm. High scanning accuracy even with longer stylus
  • 3 times longer service life of the TP200 stylus modules compared to the TP20
  •  

    Suitable for the following applications:
  • The highest precision to be measured is approx. 0.012 mm
  • The duration of the measurement plays a medium role
  • The immersion depth of 100 mm is sufficient
  • High probing accuracy even with longer styli up to 100 mm
  • Long service life of the stylus modules of over 10 million probes required
  • Swivel steps of 7.5 ° are sufficient

  • # Package 4 Package 5 - mostly bought
    Probe-Changer MCR20 SCR200
    Probe head/ Probe PH10T/TP20
    PH10T/TP200
    high precision
    Measurement software
    ThomControl
    Basic geometry with CAD Basic geometry with CAD
    Measuring range
    500-700-500
    46.490€
    P755C-C-PH1020-UK
    47.490€
    P755C-C-PH10200-UK
    Measuring range
    600-800-500
    49.490€
    P865C-C-PH1020-UK
    50.990€
    P865C-C-PH10200-UK
    Measuring range
    700-1.200-600
    56.490€
    P1276C-C-PH1020-UK
    57.490€
    P1276C-C-PH10200-UK
    Measuring range
    800-1.200-700
    62.990€
    P1287C-C-PH1020-UK
    63.990€
    P1287C-C-PH10200-UK
    Measuring range
    800-1.500-700
    69.490€
    P1587C-C-PH1020-UK
    70.490€
    P1587C-C-PH10200-UK




    Coordinate measuring machine RAPID-Plus with stepless 5-axis probe head PH20

    Renishaw PH20 probe head

    The Renishaw PH20 probe head in simultaneous panning

    Renishaw PH20 swivel probe head

    Renishaw PH20 swivel probe head

    Renishaw PH20 5-axis probe head

    Renishaw PH20 5-axis probe head

    Package 6:

    PH20 5-axis probe head swivels to any angle in space

    Can control any angle in the room. The resolution of the angular positions is 0.15 sec. When measuring circles, the head-touch function can be used. This means that the probing speed is up to 5 times higher than with conventional machine movements.

    Benefits:
  • Any angle in the room can be controlled
  • The head-touch function can be used when measuring circles. As a result, the speed of probing is up to 5 times higher than with conventional machine movements
  • The probe head can be swiveled simultaneously with the machine movement
  • Small swivel radius
  • Compact design

  • Disadvantage:
  • The stylus length is limited to 60 mm
  • If the stylus is long, the head-touch speed and the scanning accuracy are reduced
  • The head-touch function can only be used to a limited extent in the X-Y plane

  • Operation area:
  • Ideally suited for workpieces with bores in any spatial angle
  • Preferred for measuring bores, as this is where the head-touch function can best be used

  • Suitable for the following applications:
  • The highest precision to be measured is approx. 0.014 mm
  • A short measurement time is important
  • An immersion depth of 60 mm is sufficient
  • Any angle must be able to be set, since many inclined holes have to be measured

  • # Package 6
    Probe changer MCR20
    Probe head / Probe PH20
    Stepless 5-axis probe
    Measurement software
    ThomControl
    Basic geometry with CAD
    Measuring range
    500-700-500
    50.990€
    P755C-C-PH20-UK
    Measuring range
    600-800-500
    53.990€
    P865C-C-PH20-UK
    Measuring range
    700-1.200-600
    60.990€
    P1276C-C-PH20-UK
    Measuring range
    800-1.200-700
    66.990€
    P1287C-C-PH20-UK
    Measuring range
    800-1.500-700
    67.990€
    P1587C-C-PH20-UK




    Coordinate measuring machine RAPID-Plus with motorized rotary swivel probe head PH10M with scanning function

    Renishaw SP25M scanning probe

    Renishaw SP25M scanning probe

    >Renishaw PH10M scanning probe head

    Renishaw PH10M scanning probe head

    Renishaw SP25M scanning probe

    Renishaw SP25M scanning probe

    Package 7:

    PH10M motorized rotary swivel head from Renishaw for CNC-controlled swiveling of the probe head in 7.5 ° steps

    Pivots motorized in 2 axes in 7.5 ° steps (max. 720 positions). A position feedback is sent to the control. The reproducibility of the swivel position +/- 0.5 µm with a swivel radius of around 100 mm. Max. Stylus length 400 mm.

    Benefits:
  • Continuous scanning of the geometry
  • Measure high point densities in a short time
  • This makes it ideal for shape measurements (circular shape, cylinder shape, flatness, straightness, etc.)

  • Disadvantage:
  • High demands on the cleanliness of the workpieces, increased wear on the stylus
  • Rougher surfaces can cause the stylus to vibrate
  • Due to the longer design of the scanning button, more measuring path is required on the measuring machine

  • Operation area:
  • For shape measurements
  • Measure elements with a high point density in a short time
  • If stylus lengths greater than 100 mm are required

  • Suitable for the following applications:
  • The highest precision to be measured is approx. 0.010 mm
  • The measurement duration should be as short as possible for a high throughput
  • An immersion depth of up to 400 mm is possible
  • Swivel steps of 7.5 ° are sufficient

  • # Package 7
    Scanning
    Probe changer MCR400 with 2 pcs.. FCR25
    6 places / 2 equipped
    Probe head/ Probe PH10M/SP25-2
    Measurement software
    ThomControl
    Basic geometery with CAD
    Measuring range
    500-700-500
    58.490€
    P755C-C-PH10SP-UK
    Measuring range
    600-800-500
    61.990€
    P865C-C-PH10SP-UK
    Measuring range
    700-1.200-600
    67.990€
    P1276C-C-PH10SP-UK
    Measuring range
    800-1.200-700
    67.990€
    P1287C-C-PH10SP-UK
    Measuring range
    800-1.500-700
    74.990€
    P1587C-C-PH10SP-UK




    Videos

    CMMs from THOME Präzision in use

    Scanning of free-form surfaces with the portal measuring machine RAPID-Plus
    The hand-held measuring machine SMART measures a milled part with holes and distances



    Coordinate measuring machine RAPID-Plus - Applications







    More products