Placeholder image
Placeholder image


Renishaw probes


Measuring machines made in Germany by THOME Präzision



Renishaw scanning probe SP25M
Renishaw probe for single point probing TP200

Renishaw SP25M scanning probe


Structure of the Renishaw SP25M scanning probe

Structure of the Renishaw SP25M scanning probe


Renishaw scanning probe SP25M is measuring a casting

Renishaw scanning probe SP25M is measuring a casting

The scanning probe SP25M can scan continuously and single point buttons

The SP25 is the right probe if you want to do form tests on workpieces. The SP25 can e.g. scan a circle at 20mm / s and record 1000 points. A very precise statement about the form deviation of the circle is then obtained. The measuring process is very quick. So if you have to record a high point density, the SP25 is clearly superior to a normal tactile measuring probe because it is much faster. You can also work with stylus lengths of up to 400mm. With the tactile probes from Renishaw, 100 stylus length is the limit. The use of the SP25 scanning system is the best solution, especially when the dimensions and shape of components have to be checked. The SP25M was developed for scanning and switching measurement. If required, all TP20 modules can be used. This makes you very flexible. The SP25 increases accuracy and productivity.


The SP25M scanning probe is very compact

The SP25 scanning probe provides excellent accessibility to complex components. The use of long styli up to 400 mm and the possibility of working with a motorized rotary / swivel head such as the PH10M make you very flexible. The probe change magazine FCR25 also enables the automatic probe change. If necessary, additional extensions of the PEM series can be installed between the probe head and the scanning probe in order to be able to plunge even further into workpieces.


Special features and advantages

  • Compact scanning probe with a diameter of only 25 mm
  • Four scan modules for great flexibility. Stylus lengths from 10 to 400 mm
  • Continuous scanning and switching scanning with a probe system
  • Collision protection through magnetic docking of the button modules and easy button change
  • Ideal for form measurement, profile measurement and contour measurement
  • Suitable for use with the motorized rotary / swivel head PH10M for more flexibility and time-reduced scan cycles
  • Simple and robust construction for maximum reliability

  • Here you can download the technical data of the SP25M as a PDF document PDF download of the technical data of the SP25M
    SP25M in the shop Renishaw scanning probe SP25M in the shop




    Renishaw SP80 scanning probe

    Renishaw scanning probe SP80

    Renishaw scanning probe SP80

    Renishaw scanning probe SP80

    The SP80 scanning probe measures a casting

    Renishaw scanning probe SP80

    Scanning probe SP80 with long probe

    Renishaw scanning probe SP80

    Scanning probe SP80 measures a casting

    The SP80 is a measuring probe for scanning that is mounted directly on the measuring quill. The use of the separate optical data acquisition (Isolated Optical Metrology) guarantees exceptional measuring performance, even with long styli. The SP80 can carry styli, including star stylus configurations, up to 500mm in length and up to 500g in weight without the need for counterbalancing. Renishaw's M5 styli are specifically designed for use with the SP80 and are extremely accurate. The removable stylus holder allows stylus configurations to be changed quickly and with repeatability without time-consuming recalibration. This increases the measurement throughput. The optimal stylus configuration can be used for every measuring application. The robust and simple design without motorized control offers high reliability and very good thermal stability.


    Main advantages

    Use long stylus configurations with high accuracy

    The ability to use long and heavy stylus configurations with high accuracy makes the SP80 a first-choice scanning probe for a wide variety of measurement applications.

    Fast stylus change

    The stylus holder (SH80) can be exchanged automatically to increase the measurement throughput by attaching the memory modules (SCP80) to the modular exchange system (MRS).

    Low operating costs

    The modular design allows the SP80 system to be expanded according to your requirements. The robust construction offers a long service life. In the event of service, Renishaw's rapid repair / replacement service ensures minimal downtime.


    Innovations

    Separate optical data acquisition

    The SP80 determines the probe deflection directly and thereby achieves a very precise position determination. Various possible errors, such as thermal and dynamic effects, can also be recognized by the separate optical measurement value acquisition. In contrast to this, measuring probes with a conventional measuring arrangement of the axes must work with constantly changing inertial forces. This is due to the fact that when a stylus is deflected, it is necessary to move a larger mass in order to enable measurement values to be recorded in all 3 axes.

    The separate optical recording of measured values can be explained as part of the system for recording measured values. The scanning heads are attached to the housing wall inside the probe and measure the deflection in every direction. All errors between the axes that are caused by the arc movement of each of the parallel working spring pairs are measured directly by the sensor system. The perpendicularity and straightness of the axes of the SP80 are not derived from the mechanism itself, but are determined by the moving element (moving cube).

    Here you can download the technical data of the SP80 as a PDF document PDF download of the technical data of the SP80
    SP80 in the shop Renishaw SP80 in the shop




    Renishaw scanning probe SP600

    Renishaw scanning probe SP600

    Renishaw scanning probe SP600

    Renishaw scanning probe SP600 with probe changer

    Renishaw scanning probe SP600 with probe changer

    Renishaw scanning probe SP600 with star stylus

    Renishaw scanning probe SP600 with star stylus

    The SP600 series offers maximum measurement accuracy when scanning and digitizing known shapes. The probes can be used on most CMMs. Renishaw's SP600 probe enables the rapid acquisition of large amounts of data for workpiece inspection or scanning. The buttons are suitable for a variety of industrial applications such as measuring gears, sheet metal shapes and shape measurements. The measuring probes can also be used to measure the finest details (e.g. pieces of jewelery, coins, buttons).


    Complete and versatile system

    The SP600 series contains the SP600 measuring probe, a PC interface card and an interchangeable magazine for the styli. Together they provide a flexible system that meets most of the needs of today's CMMs.


    The ideal measuring probe suitable for your CMM

    SP600 probes are available in 3 versions:

  • SP600M with automatic change holder
  • SP600Q screwed directly to the quill
  • SP600 with shaft mount
  • Ideal for form measurement, profile measurement and contour measurement

  • Each of these measuring probes was developed to meet the most diverse requirements without reducing the performance features.

    benefits

  • Fast scanning up to max. 300 mm / s feed, fast position measurement and high-frequency feedback
  • Low contact forces enable a maximum range of applications
  • Extremely robust construction protects the button from moderate collisions
  • Quick change of stylus module saves time and increases productivity
  • Low operating costs and long service life, more than 50,000 working hours can be achieved

  • SP600 probe series

    The SP600 consists of a basic body with an exchangeable stylus module. The main body contains the extremely robust, parallel working sensor mechanism. The stylus modules are fixed to the base body via a kinematic bearing. This enables a quick and repeatable module change and avoids time-consuming recalibration. Stylus modules can be changed manually or automatically with the SCR600 change magazine. Accuracy, speed and exceptional performance.

    Here you can download the technical data of the SP600 as a PDF document PDF download the technical data of the SP600
    SP600 in the shop Renishaw SP600 in the shop




    Renishaw switching probe TP20

    Renishaw probe TP20

    Renishaw probe TP20

    probe changer MCR20 for TP20

    probe changer MCR20 for TP20

    Different modules of the Renishaw probe TP20

    Different modules of the Renishaw probe TP20

    Renishaw TP20 probe

    Renishaw TP20 probe

    The Renishaw TP20 measuring probe is a 5-way switching probe. A 6-way probe module is also available for probing with a star probe. The button modules are exchanged with high precision and reproducibility via a magnetic coupling. It can be changed manually or CNC. You can continue working immediately after changing the button. Recalibration is not necessary because the change process has a reproducibility of about 0.5 µm and can therefore be carried out with great precision. The probe modules with different probing forces enable optimal adaptation to the respective measuring task. Extended EM push button modules are also available, as is a 6-way push button module for star buttons. The M2 connection thread allows the use of all Renishaw M2 styli. The TP20 measuring probe can also be retrofitted very easily on old measuring machines.


    Benefits of the Renishaw TP20 probe

  • Mechanically switching probe for CNC and manual coordinate measuring machines
  • Fast, reproducible change of the button modules
  • A selection of 7 different probe modules (5- and 6-way probing directions) enables an optimal measuring process
  • Easy retrofitting to all Renishaw probes with M8 or auto mount
  • Compatible with the full line of Renishaw probes and accessories

  • MCR20 stylus change magazine from Renishaw


    MCR20 probe change magazine for use with the TP20 probe

    The MCR20 stylus change magazine from Renishaw can hold up to six TP20 stylus modules. With CNC measuring machines, the probe modules can be changed automatically. The MCR20 stylus change magazine was developed for the safe storage of the stylus modules and for quick, automatic module changes. At the same time, it protects the button modules from contamination.


    Manual storage system MSR1 for use on manual measuring machines with the TP20 measuring probe from Renishaw

    The MSR1 storage system from Renishaw offers 6 storage spaces for already calibrated TP20 pushbutton modules. It simplifies the measuring process with manual measuring machines and provides additional protection for the TP20 modules. The MSR1 can either be attached to the measuring machine table or to a bracket for wall mounting.


    Here you can download the technical data of the TP20 as a PDF document PDF download the technical data of the TP20
    TP20 im Shop Shop Messmaschienen THOME Präzision


    Probe module Probe module for TP20 Application for TP20 probe modules Probe forces stylus length
    Standard probing force TP20 module Suitable for the majority of all applications XY: 0,08N Z: 0,75N Stylus: 10 mm 10 - 50 mm
    Low probing force TP20 MF Modul Applications with low contact force e.g. rubber seals XY: 0,055N Z: 0,65N Stylus: 10 mm 10 - 30 mm
    Average probing force TP20 MF Modul Applications that require a higher probing force XY: 0,1N Z: 1,9N Stylus: 10 mm 10 - 60 mm
    High probing force TP20 EF Modul Long stylus combinations and applications where vibrations cause unwanted stylus signals XY: 0,1N Z: 3,2N Stylus: 25 mm 10 - 60 mm
    6-ways TP20 6W Modul Measurements in -Z direction - f.e. internal punctures XY: 0,14N Z: 1,6N Stylus: 10 mm 10 - 50 mm
    50 mm Extension
    Total length 75 mm
    TP20 EM1 Modul For the majority of applications requiring a 50 mm extension. The probe module has a total length of 75 mm. XY: 0,08N Z: 0,75N Stylus: 10 mm 10 - 50 mm
    75 mm Extension Total length 95 mm TP20 EM2 Modul For the majority of applications requiring a 75 mm extension. The probe module has a total length of 95 mm. XY: 0,08N Z: 0,75N Stylus: 10 mm 10 - 50 mm


    Renishaw TP200 switching probe


    Renishaw TP200 probe

    Structure of the Renishaw TP200 probe

    Renishaw TP200 probe

    Renishaw TP200 probe

    Renishaw TP200 probe measures a casting

    Renishaw TP200 probe measures a casting

    A compact measuring probe with probe module change based on strain gauge technology and offering greater accuracy and a longer service life than conventional, mechanically switching probes. The TP200 measuring probe uses a sensor based on strain gauge technology, which guarantees excellent reproducibility and highly accurate 3D free-form measurements, even with long styli. The sensor technology generates excellent repeatability and eliminates the so-called "lobing" that occurs with kinematic measuring probes. The strain gauge technology guarantees measurements of several million probes with constant accuracy.


    Special features and advantages

  • The strain gauge technology offers excellent repeatability and high-precision 3D free-form measurements
  • No reset errors
  • No lobing effect
  • 6-way technology
  • Stylus lengths up to 100 mm (carbon fiber styli)
  • Quick module change without time-consuming recalibration of the stylus tips
  • Lifespan is greater than 10 million. Switching cycles

  • Change magazine SCR20

    With the SCR200, up to six TP200 stylus modules can be changed quickly and automatically. The SCR200 is controlled by a separate interface (PI200) and has collision protection to prevent damage when driving over the change position. The SCR200 is available as an LF and SF kit, with both kits containing an SCR200 and three stylus modules of the appropriate force.


    TP200 in the shop Shop CMMs THOME Präzision
    Here you can download the technical data of the TP200 as a PDF document PDF-Download der technischen Daten des SP25M




    Video gallery of our measuring machines

    CNC and hand-held coordinate measuring machines

    Scanning of free-form surfaces with the portal measuring machine RAPID-Plus
    The hand-held measuring machine SMART measures a milled part with holes and distances




    Picture gallery of THOME Präzision CMM´s

    Renishaw probing systems in use at THOME Präzision CMM´s


    Renishaw probing systems in use with the manual CMM SMART













    More links to CMM´s from THOME Präzision

    >Measurement software ThomControl for Cmm
    Measurement software ThomControl
    User-friendly measurement software

    Fast measurement results thanks to simple operation.

    Renishaw touch systems
    Renishaw touch systems

    Probe heads / Probes / Stylus pins

    Touch probes suitable for every application.

    Clamping system for CMM
    Clamping system for CMM

    T-slot clamping plates / Breadboard panels / Clamp kit

    Flexible clamping system for quickly clamping your workpieces

    Contract measurement on CMM
    Contract measurement

    On THOME coordinate measuring machines

    Receive meaningful measurement reports quickly.


    Manual measuring machine SMART
    Manual measuring machine SMART
     Measuring range from 600/400/300 up to 800/500/300

    Manual measuring machine for quick and easy measurements.

    CNC measuring machine RAPID-Plus
    CNC measuring machine RAPID-Plus
    Measuring range from 700/500/500 up to 1,500 / 800/700

    CNC measuring machine for quick and easy measurements.


    CNC measuring machine TETA
    CNC measuring machine TETA
    Measuring range from 900 / 1,200 / 800 up to 1,100 / 2,200 / 1000

    Granite air bearing guides guarantee maximum precision.

    Second hand Measuring machines
    Second hand Measuring machines
    Modern measuring software / new electronics / tested probe systems

    Tested used coordinate measuring machines with 6 months warranty.



    Presetting measuring machine
    Presetting measuring machine
    Offset data determination

    Electrode offset data and workpiece offset data for automatic transfer to EDM machines.

    ISO 10360 test
    ISO 10360 test
    Explanations for ISO 10360

    Acceptance test and confirmation test for coordinate measuring machines

    Trade fair Control in Stuttgart
    Trade fair Control Stuttgart
    Trade fair for quality assurance

    Visit us at Control in Stuttgart. We would be happy to send you free tickets!

    +49 6159/7093-0 Call us!
    Tel +49 (0) 6159 7093-0
    Do You Have Questions?

    Our staff will be happy to help you!