Placeholder image
Placeholder image


Stylus changer magazines from Renishaw


Measuring machines Made in Germany by THOME Präzision



Renishaw probe changer magazine MCR20
Renishaw probe changer magazine SCR200
Renishaw probe changer magazine FCR25


Renishaw probe changer magazine MCR20


Tasterwechslermagazin MCR20 von Renishaw

Renishaw probe changer magazine MCR20

The MCR20 probe changer is designed for use with the TP20 touch probe. It has 6 memory locations. With the changing magazine an automatic probe change can be carried out. Stylus combinations can be changed quickly and reproducibly. The stylus changing magazine also protects the stylus modules against contamination. The magazine works absolutely passively and does not require any electrical connection to the control system. The stylus is changed via simple positioning commands. The MCR20 system has a collision protection. Translated with www.DeepL.com/Translator (free version)


MCR20 in the Shop Shop CMM THOME Präzision




Renishaw probe changer magazine SCR200


Renishaw probe changer magazine SCR200

Renishaw probe changer magazine SCR200

The SCR200 probe changer is suitable for use with the TP200 touch probe. It has 6 memory locations. With the stylus changing magazine, stylus combinations can be changed quickly, reproducibly and automatically. The installation and setup of the SCR200 stylus changer is very user-friendly.



SCR200 in the Shop Shop CMMs THOME Präzision




Renishaw probe changer magazine FCR25


Renishaw probe changer magazine FCR25

Probe changer FCR25 with 6 places

Renishaw probe changer magazine FCR25

Probe changer FCR25 with 3 places

The FCR25 probe changing system is suitable for use with the SP25 or TP20 probe. It has 3 or 6 memory locations depending on the equipment. The FCR25 probe changing magazine can be mounted directly on the measuring machine via a stand. It is also possible to use the holding system MRS400 or MRS600 (see picture). This allows several 3-fold modules of the FCR25 to be screwed to the holding system. It is then possible to build up 3, 6, 9 or 12 change places according to your needs and to easily retrofit further modules at any time. All SM25 scanning modules can be stored, as well as the SH25 stylus holders or the TP20 probe modules. The stylus change is done by positioning commands of the measuring machine.




FCR25 in the shop Shop Messmaschienen THOME Präzision




Video gallery of our measuring machines

CNC and hand-held coordinate measuring machines

Scanning of free-form surfaces with the portal measuring machine RAPID-Plus
The hand-held measuring machine SMART measures a milled part with holes and distances




Picture gallery of THOME Präzision CMM´s

Renishaw probing systems in use at THOME Präzision CMM´s


Renishaw probing systems in use with the manual CMM SMART













More links to CMM´s from THOME Präzision

>Measurement software ThomControl for Cmm
Measurement software ThomControl
User-friendly measurement software

Fast measurement results thanks to simple operation.

Renishaw touch systems
Renishaw touch systems

Probe heads / Probes / Stylus pins

Touch probes suitable for every application.

Clamping system for CMM
Clamping system for CMM

T-slot clamping plates / Breadboard panels / Clamp kit

Flexible clamping system for quickly clamping your workpieces

Contract measurement on CMM
Contract measurement

On THOME coordinate measuring machines

Receive meaningful measurement reports quickly.


Manual measuring machine SMART
Manual measuring machine SMART
 Measuring range from 600/400/300 up to 800/500/300

Manual measuring machine for quick and easy measurements.

CNC measuring machine RAPID-Plus
CNC measuring machine RAPID-Plus
Measuring range from 700/500/500 up to 1,500 / 800/700

CNC measuring machine for quick and easy measurements.


CNC measuring machine TETA
CNC measuring machine TETA
Measuring range from 900 / 1,200 / 800 up to 1,100 / 2,200 / 1000

Granite air bearing guides guarantee maximum precision.

Second hand Measuring machines
Second hand Measuring machines
Modern measuring software / new electronics / tested probe systems

Tested used coordinate measuring machines with 6 months warranty.



Presetting measuring machine
Presetting measuring machine
Offset data determination

Electrode offset data and workpiece offset data for automatic transfer to EDM machines.

ISO 10360 test
ISO 10360 test
Explanations for ISO 10360

Acceptance test and confirmation test for coordinate measuring machines

Trade fair Control in Stuttgart
Trade fair Control Stuttgart
Trade fair for quality assurance

Visit us at Control in Stuttgart. We would be happy to send you free tickets!

+49 6159/7093-0 Call us!
Tel +49 (0) 6159 7093-0
Do You Have Questions?

Our staff will be happy to help you!