English
German
Èesky
Français
ChineseRenishaw PH10T
The PH10T is a motorized indexing head, which was designed to increase the throughput. It offers the possibility to the CMM to position the probe in space. This allows measurements from different angular positions, without the need for frequent, time-consuming modification of the stylus.
The Renishaw PH10T can be repeatably orientated to any one of 720 positions. All M8 thread probes can be fitted directly onto the mount of the PH10T.
The PH10T is operated by the PHC10-2 and is compatible with other Renishaw M8 threaded products. The AM1 adjustment module permits the correction of the alignment of the probe head to the machine and is fi tted between the head and the shank.
PH10T specification
| Length | 103 mm |
|---|---|
| Width | 62 mm |
| Weight | 645 g |
| Probe mounting | M8 thread (2 wire) |
| Head mounting | Shank to suit CMM |
| Suitable controller | PHC10-2 |
| Repeatability of position | 0.5 µm (0.00002 in) specified at a distance of 48mm (equivalent to a TP2 and PS1R stylus) |
| Total no. of positions | 720 |
| Max recommended drive torque | 0.45 Nm |
| Maximum extension bar | 300mm (11.8 in) using PEL4 extension |